Haier XQG50-QF800 Guide De L'utilisateur page 18

All manuals and user guides at all-guides.com
XQG50-QF800-MANUAL 10/22/01
English
Unpacking Your Appliance
• Remove all packing materials including transportation bolts and brackets. Also
remove adhesive tape holding the accessories inside and outside.
• Inspect and remove any remains of packing, tape or printed materials before
using the washer.
• Remove 2 bolts, 4 screws and 1 center bolt holding metal bracket from the back
of the unit that are installed to protect drum and internal components from dam-
age during shipping. (Wrench is included in the instruction manual bag)
• Screws and Bolts must be removed before using the machine. Once removed,
save them so when moving you can reinstall to protect the machine from damage
during shipping.
• Once you remove the bracket, reinstall bracket screws, center bolt and plastic
plug to prevent damage to the machine.
Bracket
Screws(2)
Bolt
17
11:40 AM Page 18
Center bolt
plastic plug (not shown)
Screws(2)
Bolt