gdw 1270 Instructions De Montage page 5

Fitting instructions
1) Disassemble the light units and the bumper.
buffer beam in the rear.
2) Place the tow bar with the supporting arms in the holes in the rear of the
chassis. Points (A) are matching with the provided drillings in the side
of the chassis.
Insert the bolts and washers and tighten everything firmly.
3) Make an incision in the bumper, according undermentioned sketch, so that
the ball can be attached.
4) Assemble (*) and tighten everything firmly.
Composition
1 tow bar reference 1270
1 ball T43K000
2 bolts M12 x 35
2 bolts M12 x 40 (DIN 7991)
4 security washers M12
2 nuts M12
4 bolts M10 x 35
4 security washers M10
4 washers 40 x 35 x 12 x 4
Note
----
Please consult your cardealer, or owners manual for the max. Permissible towing mass.
Remove any bitumen coating on the fastening position for the tow bar.
When drilling, be carefull not to damage any brake lines, electrical wiring or feul lines.
VW Bora 4-motion
2000 - ....
T 1270
Permanently remove the metal
(*-B)
(*)
(Quality 8.8)
(B)
(Quality 10.9)
(*-B)
(B)
(Quality 8.8)
(A)
(Quality 8.8)
(A)
(A)