Cleaning And Maintenance - SOLIS PRO SC3200 Mode D'emploi

CLEAN ING AND M AI N T E NA N C E
s
– Switch the appliance off with the ON / OFF button (touch the button for 1 second)
and pull the power plug from the socket. Completely remove the power cord
from the appliance to prevent it from coming into contact with water.
– Wait for the appliance and the water to cool down before pouring the water into
the sink. Clean the water basin with a cloth and, if necessary, some warm dish
water. The sieve on the water outlet should be cleaned with a soft brush and
some water. After that, carefully clean and dry the water basin.
– The lid and the grid should first be cleaned carefully with warm dish water and
a soft cloth and then rinsed and dried. Always let the lid and the water basin dry
completely before closing the lid.
– CAUTION: The Sous-Vide Cooker Pro and the lid can not be cleaned in the dish
washer.
– Regularly – at least once a month or after a vacuum bag has ruptured – perform
a cleaning cycle to clean the appliance inside as well. To do that, fill the water
basin to the MIN marking with fresh tap water, add a little non-foaming dish
soap, connect the power cord to the appliance and the power socket and start
the appliance: Temperature setting 40 °C, operating time 20 minutes. After that,
pour the water into the sink and, if necessary, repeat the cleaning cycle.
– After that, allow the appliance and the water basin to dry completely before
replacing the lid.
– In general, do not use any aggressive or scouring detergents or metal sponges
to clean the water basin, the lid and the appliance, as they might damage the
surfaces. Only fill the water basin with fresh tap water.
– The appliance outside as well as the appliance bottom should only be wiped with
a wet cloth and dried. Never use alkaline detergents, only a soft cloth and a mild
detergent.
– Never submerge the Sous-Vide Cooker Pro or the power cord in water and avoid
bringing the outer chassis or the appliance bottom into contact with water.
WARNING:
The connection adapter has to be removed from the appliance socket before the
Sous-Vide Cooker Pro is cleaned. In any case, the appliance socket has to be com-
pletely dry before the appliance is used again.
90
DES CA LI N G
s
– Depending on water hardness and frequency of use, the Solis Sous-Vide Cooker
Pro should be descaled from time to time, approx. once a month, so that water
circulation can continue unimpeded.
®
– We recommend using SOLIPOL forte descaler by Solis, in a solution with water.
®
– Pour 675 ml SOLIPOL forte and 2'025 ml water into the water basin to reach
the minimum amount of 2'700 ml at the MIN marking. The dilution ratio should
®
always be a quarter of SOLIPOL
appliance in and switch it on, choose a temperature of approx. 50 °C and let the
descaling solution circulate for approx. 20 minutes. Then, switch the appliance
off and let the descaling solution sit for approx. 20 minutes. Then, pull the plug
resp. connection adapter and pour the descaling solution out.
– Fill the water basin at least to the MIN marking with fresh tap water, plug the
appliance in and switch it on and let this solution circulate for approx. 20 minutes
at 85 °C. Then, switch the appliance off, unplug it and pour the water away.
– Repeat this rinsing process with fresh tap water a second time to remove all
remains of the descaling solution.
– Damage caused by the use of improper descaling agent is not covered by
warranty.
ST OR AG E
s
– Check if the appliance is switched off and the power plug is pulled, resp. if the
power cord is removed.
– Check if the appliance, the water basin, the grid and the lid are absolutely cool,
clean and completely dry.
– Place the grid and possibly the power cord in the appliance and close the lid.
– Store the appliance standing upright in a dry, dark place, best in the original
packaging. Do not place anything on the appliance.
– Always keep the appliance and the power cord out of the reach of children.
forte to three quarters of water. Plug the
91