SOLIS PRO SC3200 Mode D'emploi page 42

THE FU NCT ION BU TTO N S
s
6 5

1 ON / OFF button : Touch the ON / OFF button for 1 second to switch the
appliance on or off. The display will light up once the appliance is switched on.

Also, the red symbol on the ON / OFF button will light up constantly once the
appliance is switched on.

2 Start / Stop button : With this button, you can start or stop the cooking
process.
3 Timer button : With this button, you can set the operation time of the Sous-
Vide Cooker Pro. Settings between 00:00 and 99:00 are possible.
CAUTION! If you do not use the Timer button, the appliance will start cooking
but not automatically switch off after a certain amount of time.
4 + button: With this button, you can increase the temperature resp. the time.
Constantly touching the button will quickly change the setting.
5 – button: With this button, you can decrease the temperature resp. the time.
Constantly touching the button will quickly change the setting.
6 Temperature button : With this button, you can choose units (°C or °F) and
set the water temperature. Touch the button once and the display starts flashing.
Repeatedly touching the button will switch between °C and °F. While the display
is flashing, you can set the desired water temperature with the buttons − and +.
Temperatures between 25 °C and 85 °C (77 °F and 185 °F) are possible.
7 Display: Once the appliance is switched on, the current water temperature
will show up on the display. While adjusting the temperature, the currently set
temperature is shown. While adjusting operation time, the currently set time is
shown. After that, the display will return to the current water temperature. The
temperature unit (Celsius or Fahrenheit) is shown to the right of the display.
NOTE: All buttons are touch sensitive sensor buttons. They do not have to
be pressed, touching them is suffcient.
82
7 1
4 3 2
OPERA TI O N
s
ST AR T ING AN D ADJ US TI NG T HE AP P LI ANC E
1. If you have completed all steps under "BEFORE FIRST USE", connect the power
cord to a suitable wall outlet. The appliance beeps and the red
ON / OFF button starts flashing.
2. Touch the ON / OFF button for one second to switch the appliance on. When
the appliance is switched on, you hear a signal sound, the red
ON / OFF button lights up constantly and the display states the current water
temperature.
NOTE: Should the water level exceed the MIN marking with the error code
"E001" being displayed nonetheless, stir a little bit of table salt into the water.
3. Now set the desired cooking temperature:
– Touch and release the Temperature button
the temperature can be set.
– Using the + and − buttons, you can set the desired temperature. Touching the
+ or − button for more than just a moment will quickly increase or decrease
the temperature shown in the display. You can set a target temperature
between 25 °C and 85 °C (77 °F and 185 °F).
– Stop touching the button once the desired temperature is shown on the
display. After 5 seconds, the display will return to showing the current water
temperature in the water basin.
4. Now set the desired cooking time:
– Touch the Timer button . Now the display flashes and the cooking time can
be set.
– Using the + and − buttons, you can set the desired cooking time. Touch-
ing the + or − button for more than just a moment will quickly increase or
decrease the time shown in the display. You can set a temperature between
00:00 (unlimited cooking time) and 99:00 (99 hours). Stop touching the but-
ton once the desired cooking time is shown in the display. After 5 seconds,
the display will return to showing the current water temperature in the water
basin.
NOTE: It is not urgently required that the cooking time is set. When the clock is
set to 00:00, the Sous-Vide Cooker Pro will work until you manually switch it off
again.
.

symbol in the

symbol in the
. Now the display flashes and
83