Appliance Description - SOLIS PRO SC3200 Mode D'emploi

APPL IAN CE D ES CRIP T IO N
s
CAUTION: Only the lid and the grid for the food bags can be removed.
All other parts are firmly connected and must not be taken apart.
74
1
2
3
4
5
6
7
APP LI A NC E DESCR I PTI O N
s
1 Lid with lateral grips and window
2 Grid for food bags
3 Stainless steel water basin
4 Basin surround
5 Appliance chassis with control panel and display, the appliance socket for
connecting the power cord can be found on the back side
6 Appliance bottom
7 Bottom cover
Worth knowing:
– The lid must be firmly placed on the appliance during cooking to keep the water
temperature constant and prevent steam from escaping. After cooking, you
can use the lid turned upside down as a tray to deposit the food bags you have
removed from the water basin.
– The grid must be placed in the water together with one or more food bags. If you
wish to cook multiple bags simultaneously, the grid will ensure that the bags are
evenly spread out in the center of the water basin. This allows optimal hot water
circulation around the food bags. Therefore, the water outlet and inlet must not
be obstructed by food bags. The grid can arrange the bags either horizontally
or vertically. It is important that the food in the bags is completely submerged in
water.
– In the water basin there is a water outlet responsible for suctioning the water and
a water inlet which pumps the hot water back into the water basin. This water
circulation heats the water and holds its temperature. Always pay attention to
the MIN marking in the water basin. The water level must never fall under that
marking during cooking.
MIN marking
water inlet
water outlet
75