Publicité
Les langues disponibles
Les langues disponibles
Parts and Features
Lid: The lid is easy to put on, take off, and clean. Always use lid
when machine is in operation and to pour.
Blender Jar: Ounces, cups, and milliliters are clearly marked.
ON(I)/OFF( ) (Power) Switch: The ON(I)/OFF( )
(power) switch is located on right-hand side of
blender base. This lighted switch controls power to
blender.
3 Speed Buttons: There are three speeds: LOW,
MED, and HIGH.
SMOOTHIE Button: Press to blend frozen or fresh
smoothies. Blender automatically stops at the end of
the program.
PULSE/CANCEL Button: Press to stop blender at
any time or press and hold button to blend at high
speed.
Quiet Shield: The quiet shield reduces amount of
noise from your blender. When placed over blender jar, it muffles the
sound that your blender produces.
Personal Blender Jar: The personal blender jar makes it easier to
make beverages to take on the go.
Base: Contains motor. DO NOT IMMERSE BASE IN WATER.
(cont.)
Preparing Blender: After unpacking blender, wash everything except
blender base in hot, soapy water. Dry thoroughly. Wipe blender base
with a damp cloth or sponge. DO NOT IMMERSE BASE IN WATER.
Care should be taken when handling cutting blade assembly since it
is very sharp. Refer to care recommendations on page 11.
IMPORTANT: Blender jar and cutting blade assembly are subject to
wear during normal use. Always inspect jar for nicks, chips, or cracks.
Always inspect cutting blade assembly for broken, cracked, or loose
blades. If jar or cutting blade assembly is damaged, do not use. Call
our customer care center to obtain replacement parts.
w WARNING
Burn Hazard. Metal parts under
blending jar get hot after use.
Do not touch.
5
Publicité
