Hamilton Beach 53604 Mode D'emploi page 11

Cleaning Your Blender
1. Unplug.
2. Remove quiet shield.
3. Remove blender jar and lid. Rotate collar counterclockwise until
collar and cutting blade assembly come apart from blender jar.
OR
3. Remove personal jar from base. Rotate collar counterclockwise
until collar and cutting blade assembly come apart from
personal jar.
CLEANING BLENDER JAR:
• Add 5 cups (1.2 L) warm water and add two drops of dish soap. Press LOW speed button and blend for 30 seconds. Rinse and dry
thoroughly.
• To clean after blending oily foods, sprinkle baking soda in blender. Add 1 cup (237 ml) white vinegar. Mixture will bubble. When bubbling
subsides, add 1 1/2 cups (355 ml) water and blend on LOW speed for 30 seconds. Wash any remaining residue with dish soap and water.
Rinse and dry thoroughly.
w WARNING Electrical Shock Hazard.
Disconnect power before cleaning. Do not immerse cord,
plug, base, or motor in water or other liquid.
w WARNING Burn Hazard.
Metal parts under blending jar get hot after extended use.
4. Wipe blender base, control panel, and cord with a damp cloth
or sponge. To remove stubborn spots, use a mild, nonabrasive
cleanser.
5. Clean quiet shield with hot, soapy water. Dry thoroughly.
6. Blender jar, personal blender jar, lid, jar collar, and cutting blade
assembly are dishwasher-safe.
7. DO NOT use "SANI" setting when washing in the dishwasher.
"SANI" cycle temperatures could damage your product. Parts
may also be washed with hot, soapy water. Rinse and dry
thoroughly. Do not soak.
11