Publicité
Les langues disponibles
Les langues disponibles
Option 2-Recommended
Attaching to a NINJALINE™ Kit line
(SLA.788 or SLA.789-both sold separately)
•
Attach the NINJAROPE™ to the NINJALINE™ by inserting a Delta
Clip carabineer into the line sleeve and then attach it to the
NINJAROPE™ steel ring (Figure 2)
•
DO NOT use with non-b4Adventure lines or injury may result.
•
See NINJALINE™ for additional instructions
Option 3
Attaching to a Fixed Point structure mount
•
Be certain that the overhead structure can support at least
350 LBS (159kg). Hanging components shall not be attached to upper body
components such as horizontal ladder.
•
Attach the NINJAROPE™ to the fixed point structure by clipping
in the carabineer into the line fixed point and then attach it to the NINJAROPE™
steel ring (Figure 3)
•
- See Public Playground Safety Handbook: Visit: www.cpsc.gov//PageFiles/122149/325.pdf.
4. INSPECTION AND MANDATORY LOAD STRESS TEST
Before anyone uses the climbing rope, you must:
Step 1: Keep your course clear - Bystanders should maintain a safe distance from the climbing rope of
at least 10ft (3.1m) to prevent impacts by person's jumping down from climbing rope. If you are unsure
about your health for using a climbing rope please consult with your doctor before attempting
Step 2: Inspect your equipment- Carefully examine your climbing rope for any signs of wear, damage or
deterioration. Replace only with genuine b4Adventure parts. Call 1-844-834-4334
Step 3: MANDATORY LOAD STRESS TEST- Suspend 350 LBS
(159kg) from your climbing rope by attaching weights to the rope
or have two people (who weigh 350 LBS together) grip the rope
and gradually suspend their weight on the rope until both of their
feet are off the ground. CAUTION: If at any time during the
testing, if you hear or see and signs of weakness (cracking
sounds, fraying etc.) stop your test, you must select either
a different location or replace damaged parts.
5. MAINTENANCE OF YOUR NINJAROPE™
At the beginning of each play season:
•
Tighten all hardware.
•
Check all protective coverings on bolts, pipes, edges and corners. Replace if they are loose, cracked or
missing.
• Check all metal parts for rust. If found, sand and repaint using a non-lead based paint meeting the requirements of
16 CFR 1303.
•
Check all moving parts including disks, ropes, cables, and chains for wear, rust, or other deterioration. Replace as
needed.
•
Check the rope and disks for deterioration, cracking or fraying. If found, DO NOT USE and dispose of
immediately.
•
X.3.1.1 Loose-Fill Materials:
b4 Adventure 4010 Holly Street Unit 16 • Denver Colorado 80216 • 1-844-834-4334
QUESTIONS?
info@b4Adventure.com ·
www.b4adventure.com
Figure 2
NINJAROPE™
Figure 3
WARNING: ADULT STRESS OR
LOAD TEST REQUIRED BEFORE USING-
This product should be tested using a
350 LBS(159kg) weight/load.
303-339-0482 -
DC:070218
3
Publicité
