Publicité
Les langues disponibles
Les langues disponibles
Installation Guide
Wallplate installation
1. Separate wallplate from thermostat.
2. Mount wallplate as shown below.
Drill 3/16 in (5 mm) holes for drywall. Drill
7/32 in (6 mm) holes for plaster.
Wall anchors
CAUTION
Thermostat should be installed by a climate control specialist to avoid damage to the
equipment.
RF Device Placement
• The thermostat must be within 30 ft (9 m) of an RF signal repeater.
P/N 041-338 Rev. C
Grasp top and bottom of wallplate
and pull to remove from thermostat.
+
+
+
Wire hole
2
M29480
Mounting screws
M33026
69-2655EFS—05
Publicité
