General Information; Declaration Of Conformity; Preface; Proper Use - Homa H501 Manuel D'instructions Original

1. General Information

1.1. Declaration of Conformity

EC Declaration of conformity in line with the EC
Machinery Directive 2006/42/EEC, Appendix II Part 1 A
Manufacturer Name and Address:
HOMA Pumpenfabrik GmbH
Industriestraße 1
53819 Neunkirchen – Seelscheid
Germany
We hereby declare, that
H 501
H 502
H 505
H 506
H 508
H 511
are conform to the following relevant requirements:
Machinery Directive 2006/42/EC
Applied harmonized standards of which have been
published in the official Journal of the EC
Responsible for compiling the technical documentation:
Vassilios Petridis
Director Research and Development / Production
HOMA Pumpenfabrik GmbH
This Declaration of Conformity was issued by:
Oberheister, 23.02.2016
Vassilios Petridis
Director Research and Development / Production
HOMA Pumpenfabrik GmbH

1.2. Preface

Dear Customer,
Thank you for choosing one of our company's products.
You have purchased a product which has been manufac-
tured to the latest technical standards. Read this operat-
ing and maintenance manual carefully before you first use
it. This is the only way to ensure that the product is safely
and economically used.
The documentation contains all the necessary specifica-
tions for the product, allowing you to use it properly. In
addition, you will also find information on how to recog-
nize potential dangers, reduce repair costs and downtime,
and increase the reliability and working life of the product.
All safety requirements and specific manufacturer's re-
quirements must be fulfilled before the product is put
into operation. This operating and maintenance manual
supplements any existing national regulations on industri-
al safety and accident prevention. This manual must also
be accessible to personnel at all times and also be made
available where the product is used.

1.3. Proper use

The HOMA products comply with the valid safety regu-
lations and meet the demands of state-of-the-art tech-
nology. In the event of improper use, there is a danger
to life for the user as well as for third parties. Moreover,
the product and/or attachments may be damaged or de-
stroyed.
It is important to ensure that the product is only operated
in technically perfect condition and as intended.
To do so, follow the operating instructions.
The pumps can be used in the range specified by us at any
time, in accordance with the current HOP.SEL version.
We have selected the pump based on the data available to
us. Please note that the offered pumps may only be used
in the defined field of application. Operating the pump out-
side the range of application can lead to operational prob-
lems or significant damage to the unit. Particularly with
long pipes, it may be necessary to start the pump slowly
via a frequency converter to slowly speed up the mass at
rest. This is the only way to ensure that the operation of
the pump above the operating limit can be reliably ruled
out. To select the frequency, we recommend our leaflet
„Frequency Converter".

1.4. Copyright

This operation and maintenance manual has been copy-
righted by the manufacturer. This operation and mainte-
nance handbook is intended for the use by assembly, op-
erating and maintenance personnel. It contains technical
specifications and diagrams which may not be reproduced
or distributed, either completely or in part, or used for any
other purpose without the expressed consent of the man-
ufacturer.

1.5. Warranty

Costs for removal and installation of the complained prod-
uct at the installation place, costs for the ride of the mech-
anicians to the location and from the installation place and
costs for transport are not components of our warranty.
EngliSH | 21