emerio TO-122830.1 Mode D'emploi page 24

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

TO-122830.1
FUNCTIONAL CHARACTERISTICS
1.
Toast aperture
2.
Toasting lever
3.
Electric browning control
4.
Full-length crumb collector
5.
Bun warmer
6.
Bun warmer lever
7.
Cancel button
8.
Reheat button
9.
Defrost button
INSTRUCTIONS FOR USE
Before initial use:
Before using the toaster for the first time, clean your toaster (see Chapter "CLEANING AND MAINTENANCE").
Operate the toaster at least twice without bread and on the highest setting. Ventilate the room during this
period.
This appliance may emit a characteristic smell when you switch it on for the first time. This is normal, and no
harm.
Make sure the crumb collector is completely positioned in place before using.
Use:
1.
Insert the power plug and cable into the socket and the appliance is in standby mode.
2.
Insert up to two slices of bread in the browning slot.
3.
Use the browning control switch to select the desired degree of browning between 1 and 7 (1 = lightest; 7 =
darkest degree of browning). No. 3 is recommended for first use. The degree of browning chosen depends
on the type of bread and individual taste.
4.
Press the toasting lever down until it engages. The toasting process starts automatically. The indicator light
of cancel button "
5.
Please remember that the toasting lever will not engage if the power plug is not inserted in the socket and
the toaster is not switched on.
6.
The toaster switches itself off automatically and the toasted bread is ejected when the desired degree of
browning has been reached. The cancel button "
Bun warmer:
Press bun warmer lever down to lift up the bun warmer; raise the lever to reset it.
Only use browning degree 1 or 2 for the bun warmer.
Note:
1)
Take care when removing bread as the bread and the top of the toaster will still be hot.
2)
Do not change the browning selection during the toasting process. First press the "CANCEL" switch; then
turn the browning control switch to adjust the browning degree.
3)
Do not place any rolls, irregular bread, round bread, etc. directly on the toast aperture but place them on
the bun warmer. If only toasting one side of the bread, please place it on the bun warmer.
4)
Make sure if toasting on the bun warmer, do not insert bread into the toast aperture. A fire may occur.
" will illuminate.
"can always be used to cancel the browning process.
- 23 -
EN

Publicité

Table des Matières
loading

Table des Matières