baltur BTL 14 Notice D'instructions page 31

PRINCIPLE DIAGRAM DISK-ELECTRODES SETTING
After having installed the nozzle, check the correct position of the electrodes and disk according to the following levels.
It's adviseable to check levels after every intervention on head.
N.B. To prevent damage to the support effect nozzle assembly/disassembly tasks with the
aid of a wrench and counter-wrench.
FAN ASSEMBLY DIAGRAM
- Observe the measurements indicated in the diagram when
fitting the fan.
11 / 18
0006080871_201401
N.B. Ignition can be improved under certain
working conditions by slightly adjusting
the position of the electrodes.
MOD. A B
BTL 14 5 0,5-1 5-5,5 3,5-5
BTL 20 4,5 0,5-1 5-5,5 3,5-4
BLT 26 6,5 0,5-1 5-5,5 3,5-4
C D