Publicité
Les langues disponibles
Les langues disponibles
1. Features
2. Preparation
3.Display
(example)
after switching on the OV 95A
After a short delay, the
display changes to:
4. Factory settings
5. Saving changes,
power failure
6. Operation
- 4 -
Transmodulation of digital DVB/QPSK satellite IF signals in
the frequency range 950-2150 MHz.
Processing of symbol rates of 15-30 Ms/s.
16,32, 64, 128 or 256 QAM cable modulation in the
frequency range 45-862 MHz.
Four-key control panel.
Liquid crystal display.
Connection facility for Headend Controller OV 51A.
Before you can set up the unit, you will need the following
information from your programme provider:
1.
SAT IF input frequency
2.
Symbol rate
This information can also be obtained in the Internet at:
http://www.satcodx.com — http://www.lyngsat.com
http://www.eutelsat.org — http://www.astra.de
OV 95A
=
Unit designation
V 1.2
=
Software version
Mod-No:
=
0
=
Module number
OV 95A
=
Unit designation
1491 MHz
=
SAT-IF input frequency
474.00
=
Output frequency
<1.0 e-4
=
Current bit error rate
Sat-IF
1237 MHz
SymRate:
27500 ks/s
F-Out:
474 MHz
Out-Att:
0 dB
QAM-Mode
64 QAM
QAMCarr:
auto
QAM Spec
inverse
The data are saved automatically about 25 seconds after the last
key was depressed. All data are retained in the case of a power
failure.
Use the UP/DOWN keys to select menu items and to change the
selected digit in a menu line.
(GB)
950 - 2150 MHz
15000 - 30000 kS/s
( ) ( )
Publicité
