Extraflame MIX02 Mode D'emploi page 36

SERVO-MOTOR ASSEMBLY
The servo-motor must be connected to the mixer valve as shown in the fi gure below.
Follow the indications given below carefully in order to guarantee the correct positioning of the
motor-valve. Incorrect connection can jeopardise system functioning
Remove the black knob, used to move the mixer
valve, by loosening the central screw
Install the adapter "b" on the axis of valve "a", positioning it respecting the invite at 45°
a
SERVO-MOTOR ASSEMBLY
Attention!
SERVO-MOTOR ASSEMBLY INSTRUCTIONS
45°
b
45°
35