Attaching Adapter Plate To Projector Mount - peerless-AV PAG-UNV Instructions De Montage

Attaching Adapter Plate to Projector Mount

Attach projector with adapter plate (D) to projector
6
mount assembly (A) by inserting the mount into the
adapter plate and twisting until the adapter plate
will no longer turn. The spring loaded captive screw
should line up with a corresponding hole on the
adapter plate. Push down and tighten the spring
loaded captive screw to secure the adapter plate to
the mount. If not using the optional security feature,
fasten thumb screw (L) in the hole opposite the
spring loaded captive screw.
OPTIONAL: For Armor Lock™ security, insert
#10-32 x 3/8" serrated washer head screw (M) in
the hole opposite the spring loaded captive screw.
Tighten with 4 mm security allen wrench (O). This
will prevent the projector from being removed.
CAPTIVE
SCREW
D
L
M
A
2
1
PROJECTOR
9 of 27
All other brand and product names are trademarks or registered trademarks of their respective owners.
Use knobs to adjust projector mount roll and pitch.
7
Knobs also may be adjusted using allen wrenchs
(O,T).
Tighten socket pin screw using allen wrench (O) to
lock roll and pitch position.
SOCKET
PIN SCREW
PITCH
ADJUSTMENT
KNOB
ISSUED: 08-13-09 SHEET #: 056-9023-7 09-10-12
ROLL
ADJUSTMENT
KNOB
© 2009, Peerless Industries, Inc. All rights reserved.
Peerless Industries, Inc.
3215 W. North Ave.
Melrose Park, IL 60160
www.peerlessmounts.com