Publicité
Les langues disponibles
Les langues disponibles
No LED lights.
• Ensure the ON / OFF-TEMPERATURE switch is not OFF.
• Ensure power is adequately supplied to the heated towel rail.
Room temperature is not enough; the heated towel rail seems not to be sufficiently
hot.
• The selector switch may be on the ECO, ANTIFREEZE, or AUTO mode to which a low tem-
perature programme has been linked. Switch to COMFORT mode and increase the set tem-
perature level.
The BOOST and DRYER LEDS flash alternately.
• Temperature error is displayed, see p.43.
The heated towel rail is always hot.
• Ensure it is not positioned in an area exposed to air stream.
• Ensure the set temperature has not been modified.
The device is locked.
• Ensure the filter is not clogged with dust particles.
• Ensure the room temperature is not too high. Otherwise the device will lock automatically.
• Ensure the keyboard lock for children is not enabled (see page 4).
If the problem persists contact your installer.
TROUBLESHOOTING
[ 48 - EN ]
Publicité
