Publicité
Les langues disponibles
Les langues disponibles
Clarifications on the keyboard lock mode
When activating the keyboard lock, the set mode and the temperature set point are recorded.
If the keyboard lock is enabled:
• The device will return to the modes and temperature set-point before using the keyboard lock
feature if there is a power outage after the next recovery.
• Any change with the selector switch or the set-point temperature, and BOOST or DRYER
buttons has no effect.
• The BOOST, DRYER, MORNING, EVENING and MORNING+EVENING modes will continue
to function normally.
• The OFF mode is a priority, so if the switch is turned to OFF the device will be turned off.
• If returned to ON mode, when the keypad is blocked the device goes back to working in the
mode set before the keypad was blocked.
Keyboard lock indicator:
The DRYER LED flashes quickly once to indicate the keyboard lock is enabled.
• DRYER not enabled => OFF LED, switched off, with flashing once a second.
• DRYER enabled => ON LED, switched on, with switching off once a second.
RESET Function
Press BOOST and DRYER buttons
simultaneously for 30s to reset
device.
This function is similar to a long
power failure. Having reset the
product, the MORNING and
EVENING programs will be
cancelled.
Temperature error
Flashing LED red / green alternately
=> temperature error
The problem may be due to incorrect reading of the
inside temperature sensor.
The user cannot intervene to solve the
problem.
[ 43 - EN ]
30 sec
Publicité
