Publicité
Les langues disponibles
Les langues disponibles
ECO mode
The ECO function can be used to reduce the electric consumption when the room is not occu-
pied for a certain period.
• To enable the function, press the dedicated
key. Every temperature previously set is low-
ered by 3°C. The
icon is shown on the display.
• To disable this function, press again the
key.
• LED A blue: resistance OFF
• LED A red: resistance ON
ASC function
The ASC function works in CHRONO mode. It brings the switch on time planned forward slightly,
to increase comfort, while at the same time reducing overall energy consumption. This innovative
function is particularly useful if reaching the set temperature in time is important, such as in bath-
rooms in the morning when you wake up for example.
To enable the ASC function press the
MODE key until the
Crono icon is shown on the
display.
• Press simultaneously the keys
and
for at least three seconds.
• To disable this function, repeat the procedure.
NOTE - This function is not available on every thermostat model; please refer to the user manual for a
precise description of the function.
NOTE - This function is only available in the Crono mode.
Open Window Detection function
The open window detection function allows the unit to detect when windows are opened in
the room, in which case it switches off the heating element for 30 minutes. This function will
be activated if an unexpected drop in temperature of at least 1,5°C is detected. The function is
deactivated if an increase in temperature of at least 1,5°C is detected, and the heating starts up
again normally. After being in this mode for 30 minutes, the unit returns to the operating mode
set previously.
• To enable the Open Window Detection function, press simultaneously the keys
and
for at least three seconds.
• To disable this function, repeat the procedure.
Consumption indicator
This useful function shows the current electricity consumption, based on the temperature set. The
icon in the top left corner of the display uses 3 colours, red, yellow, and greed, which correspond
to high, medium, and low energy consumption respectively.
Low battery warning
When the charge in the battery is low, the corresponding icon appears on the display. The batter-
ies must be replaced as soon as possible.
Note - The signal is transmitted from the remote control to the thermostat after one second from the
moment the temperature/mode/function etc. etc. have been set.
[ 37 - EN ]
Publicité
