Publicité
Les langues disponibles
Les langues disponibles
III. SAFETY INSTRUCTIONS
Before using this product, read and understand all safety instructions.
Always follow the safety instructions to minimize risk of damage to property, and to minimize any
risk of damages and injuries to persons and animals.
READ ALL THE INFORMATION BEFORE OPERATING THE PRODUCT.
1. Keep work/installation area clean
Cluttered areas invite accidents and injuries.
2. Consider work area//installation environment
Do not expose product to rain or to humidity.
Keep work area/installation well lit (natural light or sufficient artificial lighting).
Do not use product where there is risk to cause fire or explosion (in the presence of flammable liquids,
solids or gas).
3. Guard against electric shock
Avoid body contact with earthed or grounded surfaces (e.g. pipes, radiators, ranges, refrigerators).
4. Keep children away
Do not let bystanders touch the product or its power cable or extension cord.
All bystanders (esp. children) should be kept away from product and work/installation area.
Keep the product away from children or from their environment. Never allow children to operate the
appliance. Children should be supervised to ensure that they do not play with the product.
5. Store idle products
When not in use, product should be stored in a dry, high or locked up place, out of reach of children.
6. Do not force product
It will do the job better and safer at the rate speed for which it is intended.
Do not use the product for purposes other than those for which it is intended.
The product will do a better and safer job if it is used only for the purposes it was designed for.
7. Use the right product
Do not force small product or attachment to do the job of a heavy duty product.
8. Dress properly
Do not wear loose clothing or jewellery.
Wear protecting hair covering to contain long hair.
9. Use protective equipment
Wear protective equipment appropriate to working conditions and work environment
to reduce the risk of personal injury during product installation, use or manipulation.
10. Do not abuse the power cable
Never carry the product by the cable or yank it to disconnect it from the socket.
Keep the cable away from heat, oil and sharp edges.
Inspect product cable periodically and if damaged have it repaired by an authorized service facility.
Inspect extension cords periodically and replace, if damaged.
11. Do not overreach
During installation, keep proper footing and balance at all times.
12. Maintain product with care
Keep product clean for better and safer performance.
Follow instructions for cleaning and changing accessories.
Keep handles dry, clean and free from oil and grease.
13. Disconnect product when not in use, before servicing and when changing accessories.
14. Remove adjusting keys and wrenches
Form the habit of checking to see that keys and adjusting wrenches are removed from the product
before turning it on.
15. Avoid unintentional starting
Page 10 / 23
Publicité
