CHARACTERISTICS
The main characteristics of AV1407/010 universal door phone are the following:
1.
installation in 4+n (5 wires) systems and in 1+n (2 wires) systems with any kind of push button panel.
2.
possibility to have traditional call on buzzer or electronic call on handset loudspeaker
3.
electronic call adjustment or disabling by a slide switch with three positions.
- Maximum volume;
- Minimum volume;
- call disabling (this is signalled by a little red fl ag, that comes out of the door phone body)
4.
possibility to adjust the incoming speech signal volume (handset loudspeaker)
5.
possibility to adjust the outcoming speech signal volume (handset loudspeaker)
By default the door phone is confi gured for 4+n signals and for call on buzzer.
.
TERMINAL PINS DESCRIPTION
2 wires (1+n)
APP
Not connected
1
System ground
2
Speech signal/call tone
6
Not connected
OP
Connect to door phone terminal pin 1
OP
Connect to door phone terminal pin 2
Au
Free auxiliary contact
Au
Free auxiliary contact
INSTALLATION
Wall mounting procedure:
DS90330-004B
Terminal strip connections according to the system wiring
5 wires (4+n)
APP
Call tone by buzzer or electronic
1
Incoming speech signal (loudspeaker)
2
Outgoing speech signal (microphone)
6
System ground
OP
To be connected to the door phone
terminal pin 6
OP
Door opener
Au
Free auxiliary contact
Au
Free auxiliary contact
ENGLISH
5