Beta Robur 8146 Notice D'utilisation Et Instructions page 10

OPERATION MANUAL AND INSTRUCTIONS ISTRUZIONI PER L'USO
STORAGE
The hoist should be stored hanging to avoid tangling of the
load chain, in a dry and water-proof area. Clean the hoist and
lubricate the chain using machine oil before to store.
LOAD CHAIN
To be aware of the good condition, the load chain must
be inspected daily by a competent people when the hoist
is being used. The chain must be clean and lubricated at
regular intervals using machine oil.
Do not expose the chain to excessive temperatures,
chemical agents, abrasive materials and welding arcs.
MAINTENANCE
The hoist must be periodically inspected and tested with a
load by a competent people, at least once every year and, in
any cases, in accordance with the safety regulation in use in
the country of use.
Periodically, especially after heavy or intensive use, is
necessary to lubricated mechanical part.
The brake must be kept clean and dry. Never let brake
discs receive some lubricant.
The condition of the hooks must be checked regularly. The
maximum acceptable deformation on the opening of the
hook ("D", Fig. 1a – Fig.1b) is 3 mm.
WARRANTY
This equipment is manufactured and tested in accordance
with current EU regulation, and is covered by a 12-months
warranty for professional use or a 24-months warranty for
nonprofessional use.
We will repair any breakdowns caused by material or
manufacturing defects by fixing the defective pieces or
replacing them at our discretion.
Should assistance be required once or several times during
the warranty period, the expiry date of this warranty will
remain unchanged.
This warranty will not cover defects due to wear, misuse or
breakdowns caused by blows and/or falls. In additions, this
warranty will no longer be valid if any changes are made, or
if the hoist is forced or sent to customer service in pieces.
This warranty explicitly exclude any damage to people and/or
things, whether direct or consequential.
Customer service contacts
Beta Utensili S.p.a. – Divisione Robur
Zona Industriale - C.da San Nicola
67039, Sulmona (L'Aquila) - ITALY
Tel. +39 0864.2504.1 – Fax +39 0864.253132
info@roburitaly.com
EMERGENCY PROCEDURE IN CASE OF AN INCIDENT
In case of any malfunction of the hoist:
- Immediately stop all activities.
- Set up a safety perimeter.
- Call the qualified personnel to remove the load.
MARKINGS
All the information of the hoist are contained on a fixed
nameplate (Fig. 4a - Fig.4b).
10
13
11
2
4
6
8
10
Fig. 4a
3 5
2
1
6
7
9
How to read markings:
1) Manufacturer's logo (Robur)
2) CE mark
3) TUV-GS logo
4) Model number
5) Reference Standard
6) Chain size and grade
7) Serial number
8) Month-Year of construction
9) Working load limit
10) Beta Utensili S.p.A.
11) Article name
12) Overload protection device (if any)
13) Indicators of the movement of the lever hoist
The serial number consist of two parts:
a) Batch number
b) Progressive number
a b
HSZXXXXX-XXX
EN I
1
3
5
7
9
12
4
8
10
Fig. 4b