Cisco Systems Linksys Guide WET54G v3 Guide D'installation Rapide page 6

Les langues disponibles

Connect the Wireless-G Ethernet

Bridge for Network Use

After configuration, unplug the

power adapter from the

electrical outlet, and unplug

the Ethernet network cable

from the PC.

Plug the Ethernet network

cable into the RJ-45 port on

the Ethernet-ready network

device you wish to add to the

wireless network.

Plug the power adapter into a

local electrical outlet.

Congratulations! The installation of

the Wireless-G Ethernet Bridge

is complete.

The Bridge features Power over

NOTE:

Ethernet (PoE) support. PoE technology

allows a PoE adapter (also known as a

power injector, power hub, or inline

power device) to supply data and power

to an Ethernet device using a single

Ethernet network cable. To use the

Bridge's PoE feature, follow the instruc-

tions for your specific PoE device.

For additional information or troubleshooting

help, refer to the User Guide on the CD-ROM

or the Technical Support Insert. You can also

e-mail for further support.

Website

http://www.linksys.com/international

Linksys is a registered trademark or trademark of

Cisco Systems, Inc. and/or its affiliates in the U.S.

WET54G_V3-EU-UK-LA-QIG-51021 TE