Axis T93G Serie Guide D'installation page 8

AXIS T93G Series
Classification
AXIS T93G05
Note
AXIS T93G05 Protective Housing does not have a heater. Therefore, the operating
temperature limits are determined by the operating temperatures of the enclosed camera.
Operating Temperature
AXIS T93G05
Humidity
AXIS T93G05
Storage Conditions
Temperature
AXIS T93G05
Cable Area
NO NO NO TICE TICE TICE
• Use cables that keep within the specified cable area.
• Select cables in compliance with your local regulations.
• Make sure all cable holes are properly sealed.
• Use cable gaskets or cable glands that match both the cable hole and the cable area.
Diameter
From 5 to 15 mm (0.197 to 0.591 in)
To create extra cable holes, open the drill-outs located in the bottom of the housing. See Hardware
Overview on page 6 .
For information about accessories, such as cable gaskets and cable glands that allow for other
cable areas, see www.axis.com
IEC 60721-4-4 Class 4M4
IEC 60529 IP66
NEMA 250 Type 4X
–20 ºC to 50 ºC (–4 ºF to 122 ºF)
10–100% RH (condensing)
-20 ºC to 50 ºC (-4 ºF to 122 ºF)
AWG
Approximately from 4 to 6/0
8