Adjusting The Maximum Output Temperature - Noritz NC250-SV-ASME Guide De L'utilisateur

How to Use

Adjusting the Maximum Output Temperature

1 Turn off the
power.
Off
4
Set the Power button to ON when continuing to using
the unit as is. Otherwise, let the unit sit for 30 sec.
3
1
2
Press and hold the flow
2
meter alarm set button until
a sound is heard (2 sec.).
* When 2 or more units are connected with a
system controller, the upper limit function is
disabled. The full range of temperature
options will be available at all times.
3
Tone sounds
after 2 sec.
The upper limit of the hot-water
supply temperature can be
changed.
Change the
temperature using
the setting buttons.
Up
Down
17