Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
How to Use
Setting and Using the Water Heater
Caution
Temperatures above 55 °F (131 °F) can scald.
• Check the water temperature by hand before bathing or
showering.
• When setting the unit to 55°C (131°F) or higher, the
temperature display will flash for 10 seconds as a high
temperature warning.
• Take caution when using the unit again after setting to
55°C (131°F) or higher. Always check the set
temperature before use.
• Do not allow anyone to change the water temperature
while hot water is running.
12
2
1
To prevent scalding:
High Temperature
(Starting with the Power Off)
1
Press the Power
On/Off Button.
The temperature will be
displayed on the remote
control thermostat.
On
Previous set
temperature
(Ex.: 40°C (104°F))
Remote Controller Display
Flashes for 10 sec
On
Publicité
Chapitres
Table des Matières
