Noritz NC250-SV-ASME Guide De L'utilisateur page 13

Set temperature.
2
Always check the
(
temperature setting
before use.
Hot
Cold
Check the indicator lights.
Water temperature
(
°C (°F) :
The temperature settings below are examples. The temperature setting
necessary depends on the usage, the length of piping and the time of year.
37 38 39 40 41 42 43 44 45 46 47 48 50 55 60 65 70 75 80 83
(99) (100) (102) (104) (106) (108) (109) (111) (113) (115) (117) (118) (122) (131) (140) (149) (158) (167) (176) (181)
Washing
dishes, etc.
If fixtures incorporate mixing valves, set the temperature higher than usual.
* For most residential applications, the recommended setting temperature is 50°C (122°F) or less.
For applications that occasionally require a higher temperature setting, locate the remote controller
in a convenient location.
* Consult local codes for minimum operating temperatures.
3
Turn on hot
)
water.
Shower, hot water supply, etc.
On
)
*Initial factory setting is 40°C (104°F)
4
Turn off the hot
water.
Off
High temperature
13