Noritz NC250-SV-ASME Guide De L'utilisateur page 4

Masquer les pouces Voir aussi pour NC250-SV-ASME:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Important Safety Information
(Continued)
Do not place the exhaust vent terminal
in an indoor environment by means of
adding walls and ceiling (Do not en-
Prohibited
close using corrugated sheets, etc.)
Carbon monoxide poisoning or fire may
occur as a result.
[NC250-DV-ASME only]
Do not place outdoors
Rain may enter the unit or
Prohibited
the burner fire may be
blown by the wind, causing
malfunction or fire as a
result.
Do not use combustible chemicals
such as oil, gasoline, benzene etc.
in the near the heater or the
Prohibited
exhaust vent terminal.
Do not place combustibles such as
laundry, newspapers, oils etc. near
the heater or the exhaust vent
Prohibited
terminal.
Flue
terminal
Do not store or use gasoline or
other flammable vapors and liquids
in the vicinity of this or any other
Prohibited
appliance.
4
WARNING
Exhaust vent
terminal
Flue
terminal
Unit
Outdoor
Exhaust vent terminal
(indoor installation)
Unit
Leave the proper clearance between
the water heater and nearby objects
(trees, timber, boxes with flammable
Be sure
to do.
materials etc.).
[When installing outdoors (NC250-SV-ASME only)]
Upper: Min.
900mm (36")
Left side: Min.
150mm (6")
Front: Sug.
600mm (24")
[When installing indoors (NC250-SV-ASME only)]
Upper: Min.
300mm (12")
Left side:
Min. 150mm (6")
Front:
*
Sug. 600mm (24")
*
Indicates suggested clearances for maintenance.
[When installing indoors (NC250-DV-ASME only)]
Upper: Min.
300mm (12")
Left side:
Min. 150mm (6")
Front:
*
Sug. 600mm (24")
*
Indicates suggested clearances for maintenance.
Do not place or use a spray can
near the water heater or the
exhaust vent terminal.
Prohibited
Be sure the gas/power
supplied matches the
gas on the rating plate.
Be sure
to do.
Ex. For Natural Gas NC250-SV-ASME
NC250-SV-ASME
2
-
Right side: Min.
150mm (6")
Sug. 75mm (3")
from vent pipe*
Right side:
Min. 150mm (6")
Sug. 75mm (3")
from vent pipe*
Right side:
Min. 150mm (6")
(Continued)

Publicité

Chapitres

Table des Matières
loading

Ce manuel est également adapté pour:

Nc250-dv-asme

Table des Matières