Using The Sleep Timer - Onkyo CBX-300 Manuel D'instructions

Using the Timers—Continued

Using the Sleep Timer

With the sleep timer, you can set the CBX-300 so that it
automatically turns off after a specified period.
SLEEP
Press the [SLEEP] button repeat-
edly to select the required sleep
time.
With the [SLEEP] button, you can set the
sleep time from 90 to 10 minutes in 10
minute steps.
Use the Previous and Next [
buttons to set the sleep time in 1 minute
steps from 99 to 1.
SLEEP indicator
When the sleep timer has been set, the
SLEEP indicator appears on the display,
as shown. The sleep time appears on the
display for about 8 seconds, then the pre-
vious display reappears.
Checking the Remaining Sleep Time
To check the remaining sleep time, press the [SLEEP]
button.
Note that if you press the [SLEEP] button while the sleep
time is being displayed, you'll shorten the sleep time by
10 minutes.
Canceling the Sleep Timer
To cancel the sleep timer, press the [SLEEP] button
repeatedly until "Sleep Off" appears.
]/[ ]
47
En-