Presetting Fm Stations Automatically (Auto Preset) - Onkyo CBX-300 Manuel D'instructions

Listening to the Radio—Continued

Presetting FM Stations Automatically (Auto Preset)

With the Auto Preset function, you can automatically preset all of the FM radio stations available in your area in one go.
Presets make it easy to select your favorite stations and eliminate the need to tune the radio manually each time you want
to change stations. The Auto Preset function does not preset AM radio stations (see page 34).
/
1 Press the [TUNER] or INPUT
[ ]/[ ] buttons repeatedly until
"FM" appears.
or
Make sure the FM antenna is positioned
to achieve the best possible reception.
2 Press the [MENU/NO] button, and
then use the Previous and Next
[ ]/[
AutoPreset?.
3 Press [ENTER].
The confirmation message "AutoPre-
set??" appears.
To cancel the Auto Preset function at this
point, press the [MENU/NO] button.
INPUT
/
MENU/NO
ENTER
TUNER
] buttons to select
Auto Preset Caution!
Any existing presets will be deleted when the
Auto Preset function is run.
4 To start the Auto Preset function,
press [ENTER].
Up to 20 stations can be preset and pre-
sets are stored in frequency order.
Note:
• Depending on your location, a preset may be stored
with no station, and you'll hear only noise when you
select it. In this case, delete the preset (see page 39).
After Storing Presets You Can:
• Select them (see page 35)
• Name them for easy identification (see page 37)
• Copy them (see page 38)
• Erase them (see page 39)
33
En-