Muting The Cbx-300; Preset Eq; Changing The Display Brightness - Onkyo CBX-300 Manuel D'instructions

Basic Operation—Continued
DIMMER

Muting the CBX-300

To mute the CBX-300, press the remote
controller's [MUTING] button. "Muting"
appears on the display for a few seconds.
The MUTING indicator flashes continu-
ously while the CBX-300 is muted.
MUTING indicator only flashes continuously
To unmute the CBX-300, press the [MUTING] button
again.
Tips:
While the CBX-300 is muted:
• Press the VOLUME [ /
or pressing the VOLUME [
remote controller will unmute the CBX-300.
• If you turn the CBX-300 off, the next time you turn it
on, the CBX-300 will be unmuted.

Preset EQ

With the CBX-300's three preset equalizer
settings, you can change the tone of the
sound.
To select a preset equalizer setting, press the
remote controller's [PRESET EQ] button
repeatedly. The preset equalizer settings are
selected in the following order.
STANDARD DYNAMIC
MUTING
PRESET EQ
] buttons on the CBX-300
]/[ ] buttons on the
VOCAL CLEAR

Changing the Display Brightness

You can adjust the brightness of the
CBX-300's display. Press the remote con-
troller's [DIMMER] button repeatedly to
select the following options:
Normal Dim
21
En-