Publicité
If the water heating up pilot light
steam is going to finish because the temperature has dropped. Turn the water / steam knob
clockwise to the 0 position and wait until the heating up pilot light
off. BELLA is ready again to deliver steam.
WARNING! At the beginning of the steam delivery and when steam is going to finish, there may
be a spray of hot water.
Steam can reach high temperatures. Be careful.
The water / steam nozzle heats up, do not touch it.
To have a creamy cappuccino immerse the water / steam nozzle in the milk and carefully
move the container up and down.
Immediately after usage clean the water / steam nozzle thoroughly with a wet cloth.
Traces of dried milk are difficult to clean.
7. HOW TO ADJUST THE COFFEE GRINDING
Correct grinding is essential for a good Italian espresso.
If the coffee beans are ground too finely the coffee will drip, taste bitter and have no cream.
If the coffee beans are ground too coarsely, the water goes through the ground coffee too quickly.
The coffee will thus be watery and tasteless.
If the coffee beans are ligh roasted we suggest you a finer setting (turn anti-clockwise).
If the coffee beans are dark roasted we suggest you a coarser setting (turn clockwise).
A correct coffee grinding adjustment must be done while BELLA
the coffee grinding while BELLA
BELLA
BELLA
BELLA is not grinding may damage the coffee grinder.
BELLA
-
Push the grinding regulation knob ( I ) to let it out.
-
Press a coffee button (after having placed a container under the coffee outlet spout).
(Fine)
(Coarse)
26
begins flashing while BELLA is delivering steam, the
stops flashing and goes
BELLA
BELLA
BELLA is grinding. Adjusting
BELLA
-
While BELLA is grinding, turn the grinding
regulation knob ( I ) of one or two complete
rounds (360°) per time to adjust the coffee
grinding according to your personal taste.
After having adjusted it, push the button to its
original position.
Before making new adjustments check if the
coffee grinding is correct, by making a couple
of coffees.
8. PILOT AND WARNINGS LIGHTS
a) The water heating up pilot light flashes: the right water temperature for coffee
or steam has not yet been reached.
The water heating up pilot light comes on: the steam function have just been
turned off and the temperature is still too high to make coffee (see point 6). Wait
until the light goes off.
The water heating up pilot light is off while
is ready.
b) The water warning light flashes:
a) The water tank is empty and must be refilled (see chapter 2.1). Don't forget
to let air go off from circuits following the instructions of chapter 2.4.2.
b) The water tank has been introduced wrongly.
c) The coffee has been ground too finely and water can't pass through, select
a coarser coffee grinding. (see chapter 7).
Press the multifunction button
*
c) The coffee warning light flashes:
a) The coffee beans container is empty. Fill the cofee beans container
following instruction at point 2.2
b) The coffee as been ground too finely and the quantity of grounded coffee
introduced into the brewing unit results to be too small: select a coarser
grinding (see chapter 7) or increase the quantity of coffee to be grounded
(see chapter 11.3).
The coffee shortage pilot light is on: coffee has been grounded too coarsly
and the quantity of coffee introduced into the brewing unit is too thick: select
a finer grinding (see chapter 7) or decrease the quantity of coffee to be
grounded (see chapter 11.3).
Press the multifunction button
d) The coffee grounds warning light flashes = the coffee grounds box is
full. The coffee buttons will not transmit any command until you empty the
coffee grounds box.
is on: The Coffee Machine
*
: the warning light will go off.
*
: the warning light will go off.
27
Publicité
