Publicité
P
The operationg pilot light
will come on and BELLA will automatically compress the
right quantity of coffee, and make and deliver a strong espresso coffee.
If you wait too long before pressing the ground coffee button
coffee beans.
You can stop the coffee delivery by pressing the multifunction button
4.2 Weak coffee
-
By using the specially provided spoon (M), put a spoon of your favourite ground coffee blend
in the ground coffee chute (N).
-
Place a cup under the coffee spout and press the weak coffee button
P
after the ground coffee button
P
The operationg pilot light
will come on and BELLA will automatically compress the
right quantity of coffee, and make and deliver a weak espresso coffee..
If you wait too long before pressing the ground coffee button
coffee beans.
You can stop the coffee delivery by pressing the multifunction button
4.3 Two coffees
-
By using the specially provided spoon (M), put two spoons of your favourite ground coffee
blend in the ground coffee chute (N).
-
Place two cups under the coffee spout and press the strong coffee button
coffee button
(depending on whether you want 2 strong coffees or 2 weak ones) and
immediately after press the ground coffee button
BELLA will automatically compress the coffee, and then make and deliver two espresso
coffees.
Press the two-coffee button
2x
make and deliver only one coffee.
If you wait too long before pressing the ground coffee button
coffee beans.
You can stop the coffee delivery by pressing the multifunction button
24
P
BELLA will grind the
*
.
P
BELLA will grind the
*
P
and then the two-coffee button
before BELLA begins grinding, otherwise BELLA will
P
BELLA will grind the
*
9. MAINTENANCE
In order to make excellent coffee, BELLA needs to be cleaned thoroughly at regular intervals.
To remind you this, BELLA is equipped with an alarm which stops the coffee delivery every 200
cups of coffee (You will notice that all the red lights will flash in sequence). Switch the unit off
and unplug it. Clean it thoroughly by following the instructions in point 9.1 and, if necessary,
.
point10.
To use BELLA again you must stop the alarm by switching off the unit.
9.1 How to clean the brewing group
-
Switch the unit off and unplug it.
and immediately
-
Let the unit cool down.
-
Remove the drip tray and the coffee grounds box.
-
Open the brewing group housing door.
-
Remove the brewing group set screw. You can use a coin to unscrew it. ( FIG. B )
-
Take out the brewing group. Proceed as shown in FIG. C.
.
or the weak
.
2x
FIG. B
- Wash the brewing group thoroughly under the
water tap and dry it well. (FIG. D)
.
FIG. C
FIG. D
29
Publicité
