Télécharger Imprimer la page

G3 Ferrari BELLA Mode D'emploi page 20

Publicité

This sophisticated espresso coffee machine is fully authomatic and allows you to make an excellent
espresso coffee by using coffee beans. You can also make cappuccinos, hot milk, tea and any other
kind of infusion.
1. WARNING
1. Read the following instructions carefully, since they give you useful safety information about installation,
use and maintenance and help you avoid mishaps and possible accidents.
2. Remove the packing and make sure that the appliance is intact, with special attention to the supply cable.
3. In case of doubt, do not use the appliance and turn to qualified personnel.
4. Before connecting the appliance make sure that the mains voltage corresponds to the data specified on
the label. The appliance can be damaged if the voltage is not correct.
5. If the plug does not suit the socket, let it be replaced with another suitable plug by qualified personnel
only, which shall also ensure that the section of the socket cables is suitable for your appliance power
absorption.
6. Generally, the use adaptors multiple plugs and/or extensions is not recommended; should they be
necessary, please use only simple or multiple adaptors and extensions in compliance with the safety
rules in force, making sure that the capacity absorption limit marked on the simple adaptors and the
extensions and the maximum power limit marked on the multiple adaptor are not exceeded.
7. Do not use the appliance if the cable or the plug shows any damages.
8. Do not use the appliance after a possible irregular working. In this case, switch it off and do not break
it open. Refer to an authorized G3 FERRARI after-sale service for repair and require original spare parts
only. Failing to follow these instructions may impair the safety of your appliance.
9. This appliance is to be destined to its special purpose only. Any other use is to be considered as improper
and thus dangerous. The manufacturer cannot be responsible for any damages deriving from
improper, wrong or incautious use. This appliance is for HOUSEHOLD USE ONLY.
10. To protect against electric shock, do not immerse cord, plug or any parts of the appliance into water or other
fluids.
11. Do not use the appliance near explosives, highly flammable materials, gases or burning flames.
12. Do not allow children or disabled people to use the appliance if they are not properly watched over. Close
supervision is necessary when any appliance used by or near children.
13. Do not hold the appliance with wet hands or feet.
14. Never use any accessories but those provided for by G3 FERRARI. The use of accessory attachments
not recommended by the appliance manufacturer may cause hazard or injury.
15. Do not use the appliance near the bath, the shower, the wash-basin or anywhere water can turn out to be a
source of danger.
16. Do not pull the mains cable or the appliance itself when disconnecting the plug from the socket.
17. Do not let cord hang over edge of table, or touch hot surface.
18. Do not expose the appliance to atmospheric agents such as rain, wind, snow, hail. Do not use outdoors.
19. Pull out the plug from the mains socket when the appliance is not used or when cleaning it.
Allow to cool before cleaning.
20. If you decide not to use the appliance any longer, make it unserviceable by simply cutting the supply cable after
disconnecting the plug from the socket. Also make any dangerous parts unserviceable, especially for children
who could play whit the appliance.
21. Unplug from outlet when not in use, before putting on or taking off parts, and before cleaning.
22. Let other potential users read these instructions.
23. Keep these instructions.
IMPORTANT
1. Switch the unit off before plugging or unplugging it.
2. Do not operate the unit without water in the water tank.
3. Be careful when steaming as steam can reach high temperatures.
4. Close the hot water / steam knob when you do not need them.
Repairing the unit yourself is hazardous. Have it always repaired by an Authorized Service
Centre.
20
d) More pilots lights turn on and higher is the coffee temperature. Release the steam button
when you have reached the coffee temperature you want. After a few seconds the lights will
go off. The new setting has been memorized.
If you want you can modify the quantity of coffee used in the brewing cycle now (see point 11.3)
or switch off the unit.
11.3 How to modify the quantity of coffee used in the brewing cycle.
The quantity of coffee used in the brewing cycle can be modified from a minimum of about 5 grams
to a maximum of about 7 grams for each cup of strong or weak coffee.
a) BELLA
BELLA
BELLA
BELLA must be switched off.
BELLA
*
b) Press the on / off button
together with the ground coffee button
Hold them down until the on / off function pilot light
flash.
c) Press the strong coffee button
you want to modify strong coffees or weak ones) and hold it down.
d) More pilots lights turn on and bigger is the quantity of coffee that will be grounded. Release
the coffee button when you have reached the coffee quantity you want. After a few seconds
the lights will go off. The new setting has been memorized.
Complete the setting by regulating also the coffee grinding (see chapter 7).
11.4 How to reset G3 FERRARI programme.
At any moment you can reset G3 Ferrari programme.
a) BELLA
BELLA
BELLA
BELLA must be switched off.
BELLA
*
b) Press the on / off button
together with the ground coffee button
Hold them down until the on / off function pilot light
flash.
c) Press the two-coffee button
and hold it down until BELLA
The G3 Ferrari programme has been reset.
P
.
*
and the operating pilot light
or the weak coffee button
(depending on whether
P
.
*
and the operating pilot light
BELLA switches off.
BELLA
BELLA
BELLA
P
P
33

Publicité

loading

Ce manuel est également adapté pour:

044