Cisco Systems Linksys WMP54GS Guide D'installation Rapide page 3

Connect the Adapter
2
IMPORTANT: Make sure to
turn off the power to your
PC, and unplug the
power cord, before
opening the case to pre-
vent possible electrical
shock to you or damage
A
Before connecting the PCI
Adapter to your PC, make sure
that your desktop PC is pow-
ered down.
B
Open your PC case and
locate an available PCI slot on
the motherboard. Check with
your computer manufacturer
for instructions.
C
Slide the PCI Adapter into the
PCI slot. Make sure that all of its
pins are touching the slot's
contacts. You may have to
apply a bit of pressure to slide
the adapter all the way in. After
the adapter is firmly in place,
secure its fastening tab to your
PC's chassis with a mounting
screw. Then, close your PC.
D
Attach the external antenna to
the adapter's antenna port.
E
Power on your desktop PC.
Proceed to Step 3.
Connecting
the Adapter
Installing the
Adapter
Positioning
the Antenna
3