Tv Menu Features And Functions - CONTINENTAL EDISON CELED483DMLA3 Mode D'emploi

TV Menu Features and Functions

System Picture Menu Contents
3D Settings
Press to view 3D settings.
You can change the picture mode to suit your preference or requirements. The Picture mode can
Mode
be set to one of these options: Cinema, Game, Sports, Dynamic and Natural.
Contrast Sets the lightness and darkness values of the screen.
Brightness Sets the brightness value for the screen.
Sharpness Sets the sharpness value for the objects displayed on the screen.
Colour
Sets the colour value, adjusting the colors.
To set the Power Save Mode as Eco, Picture Off and Disabled.
Power Save
Mode
(When the Mode is Dynamic, Power Save mode is automatically set as disabled.)
This setting controls the backlight level. The backlight function will be inactive if the Power
Backlight
Save Mode is set to Eco. The backlight cannot be activated in VGA, Media Browser mode or
(Optional)
while the picture mode is set to Game.
Noise If the broadcast signal is weak and the picture is noisy, use the Noise Reduction setting to
Reduction
reduce the amount of noise.
Advanced Settings
Dyanmic
You can change the Dynamic Contrast ratio to desired value.
Contrast
Colour Temp Sets the desired colour tone.
Sets the desired picture size from picture zoom menu.
Picture Zoom
Note: Auto option is only available in Scart mode with SCART PIN8 high voltage/low voltage switching.
HDMI True While watching from a HDMI source, this feature will be visible in the Picture Settings menu.
Black
You can use this feature to enhance blackness in the picture.
Films are recorded at a different number of frames per second to normal television programmes.
Film Mode
Turn this feature on when you are watching films to see the fast motion scenes clearly.
Skin Tone
Skin tone can be changed between -5 and 5.
Colour Shift Adjust the desired colour tone.
RGB Gain You can configure the colour temperature values using the RGB Gain feature.
Reset Resets the picture settings to factory default settings.(Except Game Mode)
Autoposition
Automatically optimizes the display. Press OK to optimize.
(in PC mode)
H Position (in
This item shifts the image horizontally to the right hand side or left hand side of the screen.
PC mode)
V Position (in
This item shifts the image vertically towards the top or bottom of the screen.
PC mode)
Dot Clock (in Dot Clock adjustments correct the interference that appear as vertical banding in dot intensive
PC mode) presentations like spreadsheets or paragraphs or text in smaller fonts
Depending on the resolution and scan frequency that you input to the TV set, you may see
Phase (in PC
a hazy or noisy picture on the screen. In such a case you can use this item to get a clear
mode)
picture by trial and error method.
While in VGA (PC) mode, some items in Picture menu will be unavailable. Instead, VGA mode settings
will be added to the Picture Settings while in PC mode.
English - 45 -