Foster EcoPro G2 Manuel D'instructions page 3

GB
Display Icons and Switches
(Cabinet Version)
(Some icons or switches are only visible during adjustment, when activated by parameters or
User Adjustment Mode
You are required to enter this mode to make any setup changes.
These include Set Point, Keypad Security and display of T1, 2 or 3 probe temperatures.
Press and immediately release
Press to scroll through the following screens:
2
Keypad Lock
Service Mode
Compressor Function
Evaporator Fan Function
Data Download Switch
Decrease Switch
Power Switch
through operation/manual selection).
after which the
Warning/ Alarm
Temperature Setting
Defrost Function
Reduced Energy Mode
Light Switch
Increase Switch
and switches will flash/pulse together.
(Counter Version)