Table des Matières
Publicité
EKU Banio 40 GF
2 Product information
Intended use
Sliding door fitting for all-glass shower enclosures
Intended place of use
Wet indoor areas and indoor areas where condensation may occur: e.g. in kitchens or bathrooms, but without noteworthy chloride
load.
Technical data
Max. weight per sliding door
Max. sliding door width
Max. sliding door height
Sliding door thickness
Max. glass wall width
Max. glass wall height
Glass wall thickness
ESG sliding door glass thickness
ESG
Tempered safety glass according to DIN EN 12150-1
All illustrations are shown with 8 mm ( ")thick glass. The dimensions for 10 mm ( ") thick glass are shown in brackets (*).
Article number
Articles are identified by a 10-digit number.
General notes
The document "Safety Notes" (22991) is an integral part of these planning and assembly instructions.
The operating instructions, the planning and assembly instructions and the document "Safety notes" (22991) must be handed over to
the end user of powered systems.
Metric measurements apply - those in inches are for information only.
Retain the instructions. Replacements available from www.eku.ch.
Risk and residual risk
The hardware does not pose a risk or residual risk.
Disposal
Materials, accessories and packaging should be recycled in an environmentally friendly manner.
40 kg
(88 lbs.)
1
800 mm (2'7 ")
- -
2
5
2200 mm (7'2 ")
- -
8
8/10 mm ( "/ ")
5
13
---- -
---- -
16
32
1200 mm (3'11 ")
1
- -
4
3
2600 mm (8'6 ")
- -
8
5
13
8/10 mm ( "/ ")
---- -
---- -
16
32
8/10 mm ( "/ "), thickness tolerance ± 0,3 mm
5
13
---- -
---- -
16
32
5
---- -
16
13
---- -
32
7/52
Publicité
Table des Matières
