8134926manual
10/18/06
Technical Data
Model: 8006020
Weight: 8.4 lbs
Required pressure: 80 to 110 PSI
Max pressure: 120 PSI
Nail angle: 28°
Nail diameter: 10 to 12 gauge
Nail length: 2" to 3-1/2"
Magazine capacity: 80 nails
Single/sequential fire trigger comes installed for increased safety
Bump fire trigger is also included for high speed production applications
Safety Instructions
Warning: Indicates a potentially hazardous situation, which if not avoided, could
result in death or serious injury to personnel.
Caution: Indicates a potentially hazardous situation, which if not avoided, may
result in minor or moderate injury to personnel or damage to
equipment.
Warning:
1. Keep children away. All children should be kept away from the work area.
Don't let them handle the tool.
2. Use safety glasses and ear protection. To prevent foreign matter from entering
eyes, wear appropriate saftey glasses. Use of hearing protection is
recommended.
3. Wear a hardhat to protect the head when working in situations involving
ladders, stairs or scaffolding.
4. Never wear loose clothing or jewellery as they can be caught in moving parts.
5. Never use oxygen, combustible or any other bottled gas as a power source. It
can cause explosion or personal injury.
6. Use only air hose that can bear the maximum working pressure of at least 150
PSI or 150% of the maximum pressure of compressor.
7. Do not connect tool to compresed air with pressure exceeding 120 PSI
8. Do not place overly-long air hose in the working area as it presents a tripping
hazard. Make sure all connections are tight.
4:22 PM
Page 2