Torch Dimensions And Weight; Serial Number And Rating Label Location; Selecting A Location - Hobart Welders AirForce 250ci Manuel Du Propriétaire

4-4. Torch Dimensions And Weight

4-5. Serial Number And Rating Label Location

The serial number and rating information for this product is located on back. Use rating label to determine input power requirements and/or rated output.
For future reference, write serial number in space provided on back cover of this manual.

4-6. Selecting A Location

Dimensions And Weight
27 lb (12.3 kg)
Movement, Location And Airflow
10 in.
(254 mm)
OM-230 455 Page 12
.
A complete Parts List is available at www.HobartWelders.com
8-3/8 in.
(213 mm)
1 in.
(25
mm)
1-3/8 in.
(35 mm)
3.0 lb (1.4 kg)
1
10 in.
(254 mm)
8-1/4 in.
(210 mm)
10-1/4 in.
(260 mm)
12-1/4 in.
(311 mm)
1
Use handle to lift unit.
2
Locate unit near correct input
power supply.
!
2
Ref. 801 397-A
Lifting Handle
120 VAC, 20 A Receptacle
Special installation may be
required where gasoline or
volatile liquids are present −
see NEC Article 511 or CEC
Section 20.
loc_2 3/96 - Ref. 804 852-A