Special Safety Instructions For Drum Dollies; Product Description; Technical Data - Denios DT 1 / 60 Mode D'emploi

2.4

Special safety instructions for drum dollies

CAUTION
Containers must meet the transport regulations.

The drum dolly must only be pushed, never pull the drum dolly! (Exception: DT 1 / 60)

Only use the drum dolly on surfaces which are firm and which have sufficient load capacity.

Protect drums from falling over during transport.

Remove damaged drum dollies from operation.

3

Product description

The drum dolly has a stable design in S 235 JR62 in accordance with DIN EN 10025, with a sturdy chassis on
plastic castors. Drum dolly Model 200 has a stable design in PE with a sturdy chassis on plastic castors.
NOTICE
There is no standard for plastic drums.
The type of construction may vary widely.
Check each drum individually to ensure it can be lifted and transported without risk.

Only use dissipative drums in Ex zones.

3.1

Technical data

Model
Design
Overall load
capacity [kg]
Internal ∅
[mm]
Height [mm]
Model
Design
Overall load
capacity [kg]
Internal ∅
[mm]
Height [mm]
09-18
DT 1 / 60 DT 1 / 200
With handle Standard
100 350
400 610
135 125
DT 6
Non-
Electrically
electrically
conductive collection tray
conductive
450 450
840 840
123 123
DT 2 DT 3
With oil-tight spill With tilting
sump mechanism
300 350
610 610
185 145
DT 7 POLY200 E POLY200 D
With PE
Without handle With handle
450 300
600 -
180 -
Drum dolly 009_INT
Product description
DT 4
Made of Increased load
stainless steel capacity
350
610
165
POLY200 S
Integral handle
Non-electrically
conductive
300 300
- -
- -
DT 5
500
610
165
Electrically
conductive
19 / 48