Mato pneuMATO-55 Mode D'emploi page 24

Declaration of Conformity
In accordance with BS EN ISO/IEC 17050-1:2010
1. Product model / product:
Product
Model/type
Batch/serial no.
2. Manufacturer:
Name
Address
Authorised
Representative
3. This declaration is issued under the sole responsibility of the manufacturer.
4. Object of the declaration:
Product
Specification
5. The object of the declaration described above is in conformity with the relevant UK
Statutory Instruments:
2008 No. 1597
6. References to the relevant designated standards used or references to the other
technical specifications in relation to which conformity is declared:
EN ISO 12100:2010, DIN EN 809 :1998+A1:2009,
EN ISO 4413:2010, EN ISO 4414:2010,
7. The UK approved body and issued the certificate:
8. Additional information:
The technical documentation for the product is available from:
Name:
Address:
Signed for & on behalf of: MATO GmbH & Co. KG
Place of issue:
Date of issue:
Name:
Function:
Signature:
pneumatic grease lubrication pump
pneuMATO 55
MATO GmbH & Co. KG
Benzstraße 16-24
D-63165 Mühlheim / Main
MATO Industries Ltd. 26 Brunel Road, St Leonards on Sea,
East Sussex, TN38 9RT United Kingdom
pneumatic driven high pressure grease lubrication piston pump
pressure ratio 55
The Supply of Machinery (Safety) Regulations 2008
Andy Norton
MATO Industries Ltd. 26 Brunel Road, St Leonards on Sea,
East Sussex, TN38 9RT United Kingdom
Benzstraße 16-24
D-63165 Mühlheim / Main
2022.05.20
Steffen Simon
Product Manager
Lubrication Products
not applicable