Possible Malfunctions - Bartscher A300.068 Mode D'emploi

7. Possible Malfunctions

Problem
The digital display
doen not show
any symbols
Signallization of
low AC voltage.
Weighing
operation data
readout error.
Incorrect
calibration
Displayed error codes
Error
Meaning
code
• The calibration load inconsistent
with the display indication has been
used during the calibration.
no
•
The number of pieces inconsistent
with the display indication has
been used during the calibration.
•
Too low batteries voltage.
AC
• Calibration data loss.
•
Err-0
Damaged digital scale or remote
display.
• The load excesses the maximum
value.
• Calibration data loss.
Err-1
• Damaged digital scale or remote
display.
Cause
• Incorrectly connected
supply plug.
•
Discharged batteries.
•
Low batteries voltage.
• The "0" value has not
been set befor weighing.
•
The digital scale is not
calibrated.
•
The calibration load is not
precise.
Solution
•
Connect the supply plug
correctly.
•
Replace the batteries.
• Replace the batteries.
• Remove all objects from the
weighing surface, press
and begin the weighing
operation.
•
Calibrate the scale.
•
Use the precise calibration
load.
Solution
• Use the load corresponding to
the displayed value.
•
Use the number of pieces
corresponding to the displayed
value.
•
Replace the batteries or use the
mains adapter.
• Recalibrate.
•
Contact the service company.
• Remove the objects from the
weighing surface.
• Recalibrate.
• Contact the service company.
- 31 -