Safety Instructions; Installation And Connection - Bartscher A300.068 Mode D'emploi

5. Installation and operation

5.1 Safety instructions

WARNING! Hazard via electrical current!
The device can cause injuries due to improper installation!
Before installation the local power grid specification should be compared with
that of the device (see type label).
Connect the device only in case of compliance! Take note of the security advice!
•
Before connecting the mains adapter the local power grid specification should be
compared with that of the device (see type label) (230 V / 50 Hz).
WARNING!
Improper installation can lead to severe damages of the device and personal
injuries.
•
Use only the leak-proof batteries (4 alkaline batteries AAA). All batteries should
be replaced at the same time, otherwise the improper operation or disturbances
may occur.
•
Do not use the device in case it does not function properly, has been damaged or
dropped.
•
Do not use any accessory or spare parts that have not been recommended by the
manufacturer. These can be dangerous for the user or lead to damages of the device or
personal injury, and further, the warranty expires.

5.2 Installation and connection

•
Unpack the device and dispose of all packaging material.
•
Place the electronic digital scale on a level and safe surface.
•
Avoid exposing the scale to direct sunlight. It may lead to discoloration or
malfunctions.
•
Keep the scale away from water and other liquids, as it is not waterproof. Contact with
liquids may result in electric shock, injury and damage to the device when the scale is
used in a wet environment.
- 24 -