Safety Advice; Cleaning; Safety Instructions For Maintenance - Bartscher A300.068 Mode D'emploi

6. Cleaning and maintenance

6.1 Safety advice

o Before beginning with repair or cleaning works make sure that the adapter has been
disconnected from the device and from the power socket (pull the power plug!).
o Do not use any acid agents and make sure no water ingresses the device.
o To protect yourself from electric shock, never immerse the device, its cables and
the plug in water or other liquids.
CAUTION!
The device is not suited for direct washing via water jets.
Therefore, you must not use any kind of pressure water jet for cleaning the device!

6.2 Cleaning

o The device should be cleaned regularly.
o The remote display should be cleaned with use of moist, soft cloth and mild cleaning
agent.
o When required, remove the weighing surface from the device for washing. Use soft
cloth only and make sure you never use any kind of abrasive agents or pads, which
could scratch the surface.
o After the cleaning procedure you should use a soft and dry cloth to wipe dry and
polish the surface.

6.3 Safety instructions for maintenance

o Check the mains adapter and the mains lead from time to time to ensure they are not
damaged in any way. Never use the device if the lead or adapter is damaged. If the
mains adapter or the lead are damaged they must be replaced by a qualified
electrician.
o In case of damage or malfunction, please contact your stockist or our customer
service centre. Pay attention to the troubleshooting tips in pt. 7.
o Only a qualified technician and using original spare parts and accessories should
carry out repairs and maintenance of the device. Do not attempt to repair the
device yourself.
- 30 -