Publicité
Les langues disponibles
Les langues disponibles
Carry out the following steps to change the blade:
fig. 15
.
Undo the fastening screw (Figure 15/Item A).
.
Remove the blade and replace with a new one.
.
When fitting the blade (Figure 16/Item B), make sure it is installed in the right
direction. The blade's air vanes must jut into the motor compartment.
.
Then retighten the fastening screw with the universal wrench. The tightening
torque should be approx. 15 Nm.
Storage
Store the equipment and accessories out of children's reach in a dark and dry
place at above freezing temperature. The ideal storage temperature is between
5 and 30 °C. Store the electric tool in its original packaging. Keep the battery half
fully charged before storage.
A
fig. 16
B
|
GB
96
| 97
Publicité
