Publicité
Les langues disponibles
Les langues disponibles
Before starting the equipment
fig. 3.a
fig. 3.c
Fitting the push bar (Fig. 3-4) Undo the screws of quick-lock lever (13) of both
sides, fit the tube of bottom push bar into the position provided for it and screw in
the quick lock lever (13) to a position where the push bar can be secured when the
quick-lock lever (13) is flipped over. Proceed in the same way on the other side.
When you fit the top push bar you can decide the height of the push bar by
selecting the appropriate fastening hole. Fasten the top push bar using the holes
on the same level. Fix the top push bar to the bottom push bar with the quick-lock
lever (12) provided in the same way described as above.
Fitting the grass bag (Fig. 5-6)
fig. 5.a
fig. 6.a
Fit the two halves of the grass bag together (Fig.5a). The two halves are identical.
Ensure that all the plastic lugs engage correctly (Fig. 5b). Pull the grass bag over
the bar frame (Fig. 5c).
fig. 3.b
fig. 4.a
fig. 5.a
fig. 6.b
fig. 4.b
fig. 5.c
|
GB
88
| 89
Publicité
