Publicité
Les langues disponibles
Les langues disponibles
result of this.
Please note that our equipment has not been designed for use in commercial,
trade or industrial applications. Our warranty will be voided if the equipment is
used in commercial, trade or industrial businesses or for equivalent purposes.
!
When using the equipment, a few safety precautions must be
observed to avoid injuries and damage.
Please read the complete operating instructions and safety
information with due care. Keep these operating instructions in a
Important!
safe place so that the information is available at all times. If you
give the equipment to any other person, hand over these operating
instructions and the safety information as well. We cannot accept
any liability for damage or accidents which arise due to a failure to
follow these instructions and the safety information.
Safety information
!
Read all the safety regulations and instructions. Any errors made
in following the safety information and instructions set out below
may result in an electric shock, fire and/or serious injury.
CAUTION
Keep all safety information and instructions in a safe place for future use.
General safety regulations for this electrical tool.
.
This equipment is not designed to be used by people (including children) with
limited physical, sensory or mental capacities or those with no experience and/
or knowledge unless they are supervised by a person who is responsible for their
safety or they have received instructions from such a person in how to use the
equipment safely.
.
Children must always be supervised in order to ensure that they do not play with
the equipment.
Safety instructions for hand mower
.
Before use, check the mains cable and extension cable for signs of damage and
aging.
.
If the cable is damaged during operation, disconnect it immediately from the
power supply. Check the machine for signs of damage before use. Repairs may
only be carried out by our service workshop. If unusual vibrations occur during
use, switch the machine off immediately and pull the plug. Check the cutters
and clean them if necessary. If the machine continues to vibrate, switch it off,
disconnect it from the mains supply and send it to our service workshop.. The
machine must not be tipped whilst it is being started. Both hands must be on the
handle when you start the machine.
| | 83
GB
82
Publicité
