Publicité
Les langues disponibles
Les langues disponibles
.
Worn parts may only be replaced by our service workshop. If necessary contact
the service address provided.
WARNINGS
.
Do not use the mower if the connection cable is damaged or worn.
.
Do not use a damaged cable to connect the machine to the mains supply and do
not touch a damaged cable whilst it is connected to the mains. A damaged cable
can result in contact with live parts.
.
Do not touch the cutters until the machine has been disconnected from the
mains and the cutters have reached a complete standstill.
.
Keep extension cables away from the cutters. The cutters can damage the cables
and result in contact with live parts.
.
Break the connection with the mains supply (in other words pull the plug out of
the socket):
- whenever you leave the machine unattended;
- before released a blocked cutter;
- before inspecting or cleaning and before working on the machine;
- if a foreign body has been struck;
- whenever the machine starts to vibrate oddly.
Carefully read the instructions for how to operate the machine safely.
We recommend that the machine is only connected to a power supply protected by
means of an earth-leakage circuit breaker (RCD) with a maximum trip current of
30 mA.
Note
a) Read the directions with due care. Familiarize yourself with the operator
controls and proper operation of the machine.
b) Never allow children or other persons who are not familiar with the operating
instructions to use the mower. Contact your local governmental agency for
information regarding minimum age requirements for the user.
c) Never mow in the direct vicinity of persons -especially children - or animals.
d) Always keep in mind that the operator or user of the equipment is responsible
for accidents involving other persons and/or their property.
Preliminary measures
a) Always wear sturdy, non-slip footwear and long trousers when mowing. Never
mow barefoot or in sandals.
b) Check the ground on which the equipment will be used and remove all objects
that could be caught up or violently flung out.
c) Before using the scythe, visually inspect it to ensure that the blade, mounting
bolts and the entire cutting apparatus are in good working any imbalance,
replace worn out or damaged blades and mounting bolts as a set only (if
applicable).
Publicité
