Press twice =
(The symbol
played continuously.
Press three times = (RDM appears in the display) all titles are
replayed successively in random order.
Press four times = (INTRO appears in the display) every title
of the CD is played for 10 seconds each.
Press five times = All functions are cancelled. The normal
play mode is resumed.
Only when playing CD' s in MP3 format:
Press once =
(The symbol
is repeated continuously.
Press twice =
The selected folder of the MP3 CD is
repeated continuously (
appears in the display).
Press three times = (The symbol
played continuously.
Press four times = (RDM appears in the display) All titles are
replayed successively in random order.
Press five times = The function is deactivated and the CD is
played in the normal mode.
FOLD+/+10 and FOLD-/-10 (10/14) (only with MP3 CD' s )
• Press this button during playback to skip forward, or back
by 10 titles each (if more than 10 titles are stored on a
CD).
• Keep the button pressed down to select the next or
previous folder (if the CD contains several folders).
Programmed Play
This can be used to program any desired sequence of tracks.
1. Press the STOP button (16).
2. Press the "PROG./P-MODE" button (12). "P01" (preset
location) appears on the display and PROG flashes on
the display. Use the
NEXT/ BACK buttons (9/15)
to select the desired track and then press the "PROG./
P-MODE" button again. The display changes to memory
slot P02.
3. Select the next track with the
and press the "PROG./P-MODE" button again. Repeat
the procedure until all the desired tracks are selected.
NOTE:
Once the storage capacity of the tracks to be pro-
grammed has been reached "FUL" flashes in the
display.
4. Press the
/ button (8). The playback starts. The first
selected track number is shown on the display, the mes-
sage "CD " or "MP3 " and PROG is shown on the
display.
5. Press once the STOP button to stop the playback while
retaining the program.
6. To play the programme back again, press the
button.
All manuals and user guides at all-guides.com
is lit) the whole CD is
7. To delete the program, press the STOP button twice.
The device stops automatically after all the programmed
titles have been played back. The PROG display will go out
and the programmed sequence will be deleted from the
memory.
Playing back Music in MP3 Format
With this device it is possible to play back pieces of music in
flashes) the current track
MP3 format. The device also supports all standard CD types:
CD, CD-RW, CD-R.
FOLDER
This machine of is able to play MP3 CDs. Up to 200 tracks
can be compressed and stored on these CDs. Your machine
is lit) the whole CD is
detects an MP3 CD automatically (the total number of tracks
and MP3s appears in the display). If you would like to play
one of these CDs, proceed as described under "Playing
CDs/MP3". Tracks can be programmed as described under
"Playing Back Programmed Tracks".
Please note:
There are a number of different recording and compression
methods, as well as quality differences between CDs and self-
recorded CDs.
Furthermore, the music industry does not adhere to fixed
standards (copy protection).
For these reasons it is possible that in rare cases there are
problems with the playback of CDs and MP3 CDs. This is not
a malfunction of the device.
Cleaning and Maintenance
• Always remove the mains plug before cleaning the
• Any marks on the surface can be wiped off with a slightly
NEXT/ BACK button
Troubleshooting
Symptoms
CD can not be
played back.
CD jumps dur-
ing playback.
Device cannot
be operated.
/
The PROG control lamp goes out.
machine.
damp cloth without any additives.
Course
CD is not inserted
or inserted incor-
rectly.
Batteries too weak. Insert new batteries
Check the disc for
fingerprints, dirt or
scratches.
Device crashes and
"hangs".
English
33
Solution
Ensure that the disc is
inserted with the label
facing upwards.
or operate the device
with the mains lead.
Check the disc for
fingerprints, dirt or
scratches.
Disconnect the power
supply for 5 sec. Then
switch the device on
again.