Using Your Appliance; Using The Coffee Maker; Using The Auto Brew System - Brandt CAF1318E Manuel D'instructions

Masquer les pouces Voir aussi pour CAF1318E:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

 Press the "Minute" key to adjust minutes. If you press the button for a long time the hours display
will run faster.
 After setting the time, press the "prog" key to validate. If you do not validate you choice within 8
seconds the programming will be cancel.

3 USING YOUR APPLIANCE

3.1

Using the coffee maker

This is not necessary to set the clock of the appliance if you want to prepare your coffee immediately.
For using auto brew refer to the next section.
Open the lid and fill the water reservoir with fresh, cold water up to the level corresponding to the
desired number of cups of coffee. Do not exceed the maximum level of the reservoir.
Place the paper filter in the filter basket.
Corresponding to your taste, put suitable coffee powder on the paper filter by spoon and close the
filter holder lid.
We suggest one level tablespoonful of coffee per cup of coffee. Once you have used the coffee
maker several times, you will be able to adjust the amount of coffee according to your taste.
Close the reservoir lid.
Place the jug with its lid duly in place, onto the hot plate. The jug will open the anti-drip valve
when placed correctly onto the plate; otherwise the filtered coffee will not pass into the jug and
the filter may overflow.
Plug the appliance in and turn the coffee maker on by pressing the on/off switch. The indicator
light will come on. The water will begin to filter through the coffee maker, pouring the coffee into
the jug.
Once the coffee is ready, the hot plate will keep the coffee hot for 40 minutes. If there is no need
to preserve heat, press ON/OFF button and the unit will stop working.
After 40 minutes, the coffee maker will shut off automatically anyway, for energy saving.
Unplug the coffee maker.
The coffee maker is fitted with an anti-drip system; this prevents the coffee from dripping
onto the plate when the jug is not properly in place.
3.2

Using the auto brew system

Open the lid and fill the water reservoir with fresh, cold water up to the level corresponding to the
desired number of cups of coffee. Do not exceed the maximum level of the reservoir.
Place the paper filter in the filter basket.
Corresponding to your taste, put suitable coffee powder on the paper filter by spoon and close the
filter holder lid. We suggest one level tablespoonful of coffee per cup of coffee. Once you have
used the coffee maker several times, you will be able to adjust the amount of coffee according to
your taste.
Close the reservoir lid.
Place the jug with its lid duly in place, onto the hot plate. The jug will open the anti-drip valve
when placed correctly onto the plate; otherwise the filtered coffee will not pass into the jug and
the filter may overflow.
Plug on the appliance (do not turn on the appliance using the ON/OFF button).
Select the desired time (refer to the section concerning the first use).
The green light will go on showing that the appliance is ready.
If you want to cancel the auto brew system, press "prog" button. The green light will turn off.
At the programmed time the brewing process will begin automatically. The red light will go on and
the green one will go off.
21

Publicité

Chapitres

Table des Matières
loading

Table des Matières